Articles

Main page | About Us | Articles

Open paint booth with air recovery in Schauer company

The company Schauer Nábytek from Petrov nad Desnou provides quality services in residential and commercial interiors in very acceptable prices. The motto of the company is to make everyday life more comfortable and enjoyable.

The company Schauer takes care of its clients and also employees and in order to make the working environment better the company has invested in opened paint booth Eurodry equipped with air recovery system CTA 2.

We are very pleased that we could help the company to realize this investment.

Created:
arrow Read more...

Are you looking for dust collectror for edgebander?

The popular dust collector MOBIL 200 for edgebanders gets two more brave brothers!

The new concept in the field of dust collectors for the edgebanding machines is the dust collector the FT 416 and the FT 420 series. It may seem that there is no more place to bring some news in the field of dust collectors for edgebanding machines except the high underpressure, but the opposite is true.

Dust collectors FT 416 and FT 420 series bring 3 important advantages in comparison to MOBIL 200. Greatly en­larged filtration area allows to connect the dusty pre-milling aggregates, pos­sibility of rotating the inlet up or down, and all-metal rotor put these dust collectors regarding to their functionality into a completely new level.

We kindly invite you to make sure about the power of these dust collectors in our show and testing centre in Paskov.

Created:
arrow Read more...

Dust collector for CNC to extract oversized parts

Do you think that our dust collectors are only used by workshops? Never. For example, the company ALBIXON a.s., which is producer of swimming pools more than 25 years.

They needed to solve quickly and in high quality the exhaustion for CNC for oversized parts, and they have contacted us. We have delivered them dust collector FT 650 9 kW SA including pipeline system and hoses. Everything was done excellently. The production is running at full speed now. We wish ALBIXON success, good luck and many interesting orders.

Created:
arrow Read more...

Combiformer Plus in Brussels, Belgium

We would like to welcome Belgian company D.B.S.I. among the group of producers manufacturing their solid surface products on ADAMIK Combiformer Plus. Thank you for choosing our machine.

Created:
arrow Read more...

Combiformer Plus XL

Combiformer Plus XL with heating area of 3 500 × 1 300 mm and shaping area of 3 850 × 1 450 mm was shipped to our customer in Finland this week.

The final destination of the machine is in city of Konskenkorva where the famost Koskenkorva vodka is produced. We believe this was a reason why the customer asked for bottle of Becherovka as a part of our deal. And we did…

Created:
arrow Read more...

Solid surface shaping –Ingema company

Recently we installed our device for Forming of solid surface in the company INGEMA in Michalovce, Slovakia. This device it is a combination of heating oven and the membrane press. We have made some successful tests on material DuPont Corian in our workshop.

The heating oven is not depend on the membrane press and could be also used separately. We have placed the heating oven under the vacuum press to save space. The vacuum press can be used besides the forming of solid surface also for veneering. There is possibility to divide the oven into the three heating zones and save energy consumption. It is because of double-sided heating plate. The heating speed depends on material thickness.

We thank the company INGEMA for positive feedback and wish them much success.

Created:
arrow Read more...

New premises of ADAMIK Company

Dear customers and business partners we are pleased to invite you to our new premises. You can visit us at:

ADAMIK Company, s.r.o. Mitrovická 804 739 21 Paskov Czech Republic Mo – FR: 7:30 – 15:30 hrs

Created:
arrow Read more...

Installation of FT 6xx extraction unit in the company HAST RETAIL, s.r.o.

Dynamically developing company HR is engaged in processing and realization of interior projects of shops and stores. The company has contacted us regarding the delivery of central exhaustion system to their workshop.

We have located untypical type of dust collector FT 650 L 9 kW, exhaustion capacity 11 000 m3/h, underpressure 5000 Pa. The dust collector is being connected to the some sanders, edge banding machines, milling cutter and panel saw.

The second part consists of dust collector FT 630 4 kW, exhaustion capacity of 8 800 m3/h, underpressure 3000 Pa. This device is being connected to the CNC machine with the thicknesser.

The challenge for us it was to install the pipeline into the hall. Because inside the hall there were vaults, the installation was very difficult. But everything was done very well and we hope that the company HAST RETAIL will contact us again in the case of need.

Created:
arrow Read more...

Extraction of the CNC machines – FT 615 series

We were recently contacted by company Hanzlik & Hanzlik from Otice near Opava. They asked us for an offer for exhaustion device to CNC machine Holz-Her Pro-Master 7017. Although it is a small family company, they are able to meet the requirements of even the most demanding clients. They specialize in a job production and design solutions of tailor-made furniture.

Our specialist for exhaustion devices, colleague Rosťa, has offered them optimal solution for the CNC machine. The installation of the dust collector FT615 was done without any problem. We believe that our device will be working perfectly in company Hanzlík & Hanzlík for a long time.

Created:
arrow Read more...

Extraction in the printing industry

Recently we solved situation of quick installation of classic dust collector FT xxx SF series in the company FINIDR, which operates in printing industry for many years, not only in the Czech Republic but also abroad.

The company Finidr has decided to invest in new machine – corner trim. But the trim without the dust collector was still clogged by paper scraps. The situation should be resolved immediately. We did not hesitate any minute and we delivered the corner trim even on the day we received the order.

We are very pleased, that we were able to help with this urgent problem and look forward to our further cooperation.

Created:
arrow Read more...

Extraction of a panel saw

After some time we bring again some information about our new installation. This time it was an installation of dust collector FT 615 3 kW with automatic start to the panel saw in company Murtfeld plasty, s.r.o.

This atypical solution with automatic start of the dust collector, when you turn on the panel saw, were designed directly to company Murtfeld plasty. The company Murtfeld designes and processes technical plastics for using in industry and is one of the world manufacturers of sliding profiles, chains and belts guides, chains tensioners and abrasions of resistant plastic parts with sliding charakteristics. We are convinced they will be satisfied with our device during their processing of the plastics.

Created:
arrow Read more...

Do you want an atypical press? Not a problem!

We have recently completed the installation of the press in company AMBIence expo, s.r.o. in Adamov. This company focuses mainly on production of luxury stands at exhibitions throughout Europe, Russia and the Middle East. Their credo is perfect quality and purity of design.

Due to work with large format materials it was necessary to design the press which would suit the needs of the company. For this reason the atypical membrane press with rubber membrane was built. After a short testing the company made sure that working with our press is easy and it can help them to move forward.

The spray dry wall with double filtration for water-based paints was also installed. We have helped to solve a wide-belt sanders extraction including edge banding.

We thank company Ambience expo for excellent cooperation during the contract implementation. We believe that they will succeed on the international stage as before!

Created:
arrow Read more...
arrow Previous 2 z 3 arrow Next

Contact form

Aamik cistič

Thank you for filling out the form and we will try to reply to you as soon as possible.